A building constructed in 1985 might seem too new to require an asbestos inspection. After all, asbestos use has declined significantly over the years, and many asbestos-containing products have been restricted or phased out. So why are inspections still necessary for buildings constructed decades ago?
The answer is that a building’s construction date alone cannot determine whether asbestos-containing materials are present. Before renovation, remodeling, repair, or demolition work begins, building owners need to understand what materials may be affected by the planned work and what regulations apply.
In New York State, asbestos surveys play an important role in protecting workers, building occupants, and the public from potential exposure to asbestos fibers. Understanding these requirements can help property owners plan projects responsibly, avoid unexpected delays, and ensure that work is completed in accordance with applicable regulations.
Understanding New York State’s Asbestos Inspection Requirements
New York State regulates asbestos through Industrial Code Rule 56 (12 NYCRR Part 56), which establishes requirements for asbestos surveys, contractor licensing, worker certification, and abatement procedures.
According to New York State Department of Labor (NYSDOL) guidance issued in January 2026, property owners must obtain an asbestos survey before demolition, renovation, remodeling, or repair work begins. The survey must be conducted by a New York State-certified asbestos inspector.
The inspection must identify asbestos-containing materials that could be disturbed by the planned work, including materials in both interior and exterior areas.
A completed survey must also be provided to the local jurisdiction issuing the demolition permit and the local Asbestos Control Bureau District Office before work begins.
Does Building Age Matter?
New York State regulations include certain survey exemptions, including buildings whose original construction began on or after January 1, 1974. However, these exemptions do not eliminate other applicable federal or state requirements.
NYSDOL’s January 2026 guidance clarifies that exemptions under Rule 56 do not provide relief from applicable EPA, OSHA, or other Rule 56 survey requirements. Certain exempt buildings that have not been surveyed must also be assumed to contain asbestos during demolition unless appropriate documentation establishes otherwise.
OSHA also uses 1980 as an important threshold for certain presumed asbestos-containing materials (PACM), including specific insulation and surfacing materials.
However, asbestos can still be present in buildings constructed after 1980. Flooring, ceiling tiles, joint compound, roofing products, and other building materials may contain asbestos depending on their composition and installation history.
The important takeaway is that a building’s age alone does not establish whether asbestos is present. Evaluating the actual materials that may be disturbed is an important part of responsible project planning.
How Did Asbestos Regulations Develop?
Asbestos regulations have evolved over several decades as researchers and regulatory agencies have gained a better understanding of the health risks associated with asbestos exposure.
Some important milestones include:
- 1973: The Environmental Protection Agency (EPA) established the Asbestos National Emission Standards for Hazardous Air Pollutants (NESHAP), addressing asbestos emissions from activities such as renovation and demolition.
- 1980: This year is an important threshold under Occupational Safety and Health Administration (OSHA) regulations for identifying certain presumed asbestos-containing materials in buildings. These include specific thermal system insulation and surfacing materials.
- 1986: The Asbestos Hazard Emergency Response Act (AHERA) established inspection and management requirements for asbestos-containing materials in public and nonprofit private school buildings.
- 1989–1991: The EPA issued a rule intended to ban most asbestos-containing products in 1989. However, a 1991 court decision overturned much of that rule, leaving some asbestos-containing products outside the ban.
- 2007: Changes to New York’s asbestos regulations incorporated additional federal requirements and strengthened provisions governing surveys, licensing, worker certification, notifications, and abatement practices.
- 2019: The EPA adopted restrictions intended to prevent discontinued asbestos-containing products from returning to the U.S. marketplace without regulatory review.
- 2024: The EPA finalized a rule prohibiting ongoing uses of chrysotile asbestos, with specific phaseout periods depending on the product and application.
Although regulations have become more restrictive, asbestos-containing materials installed in earlier years can still be present in existing buildings today.
What Building Materials May Contain Asbestos?
Asbestos is a naturally occurring mineral made up of strong fibers that resist heat and corrosion. These fibers are extremely small and lightweight, making them difficult to see and easy to release into the air when materials are disturbed.
According to NYSDOL, building materials that may contain asbestos include:
- Pipe and boiler insulation
- Fireproofing
- Plaster, wallboard, and joint compound
- Putties, caulks, paints, and cements
- Floor and ceiling tiles
- Siding and roofing shingles and tars
The presence of these materials does not automatically mean they contain asbestos. A certified inspector can evaluate suspect materials and arrange for appropriate sampling and laboratory analysis.
Why Are Inspections Important Before Renovation or Demolition?
Asbestos-containing materials do not necessarily pose an immediate exposure risk when they remain intact and undisturbed. The concern arises when these materials are damaged, cut, drilled, sanded, removed, or otherwise disturbed.
When asbestos fibers become airborne, they can be inhaled and become trapped in the lungs. Exposure to asbestos is associated with serious health conditions, including mesothelioma, lung cancer, and asbestosis.
The health risks are significant because the risk of lung cancer and mesothelioma increases with the number of asbestos fibers inhaled. This makes identifying potential asbestos-containing materials before construction activities begin especially important.
An asbestos inspection helps identify materials that may be affected by planned construction activities before work begins. This information allows building owners, contractors, and project teams to make informed decisions about how to proceed.
Federal EPA requirements also play an important role. Under the Asbestos NESHAP, covered demolition and renovation activities require a thorough inspection of the affected areas. Certain notification and work-practice requirements also apply depending on the project and the quantity and type of regulated asbestos-containing material involved.
Identifying asbestos before construction begins can help:
- Protect construction workers, building occupants, and the public.
- Determine whether asbestos abatement is necessary before renovation or demolition.
- Help contractors plan appropriate work practices and safety precautions.
- Reduce unexpected project delays and costs.
- Support compliance with applicable state and federal regulations.
Who Can Perform Asbestos Abatement?
Identifying asbestos is only part of the process. When asbestos-containing materials need to be disturbed or removed, the work must follow New York State licensing and certification requirements.
Under Industrial Code Rule 56, general contractors and other construction trades without the appropriate asbestos handling license cannot disturb or remove asbestos-containing materials or perform asbestos projects.
Asbestos abatement must generally be performed by New York State-licensed asbestos contractors using certified asbestos workers with the required training, protective equipment, and work practices.
NYSDOL recognizes a limited homeowner exemption for owner-occupied single-family dwellings when the homeowner performs the work themselves. However, this does not apply to buildings scheduled for demolition or structures certified as unsafe.
Beyond Asbestos: Other Hazardous Materials
Asbestos is not the only material that may require evaluation before renovation or demolition. Depending on a building’s history and planned scope of work, additional assessments may be necessary.
- Lead-Based Paint: Commonly found in older buildings, lead-based paint can create hazardous dust and debris when disturbed.
- Polychlorinated Biphenyls (PCBs): These chemicals were used in certain building materials and electrical equipment, including some caulks, sealants, and fluorescent light ballasts.
- Mold: Moisture intrusion, leaks, and poor ventilation can contribute to mold growth and may require assessment and remediation.
Each material has its own regulatory requirements and evaluation procedures.
Plan Ahead with Encorus Group
Whether a facility was constructed in 1965, 1985, or 2025, understanding its building materials is an important part of planning renovation, remodeling, repair, or demolition work.
Identifying potential hazards before construction begins helps property owners make informed decisions, protect the people involved, and avoid unexpected project complications.
Encorus Group provides regulated building materials services, including asbestos inspections, lead-based paint assessments, and other hazardous materials evaluations to support safe and informed project planning.
Click the link to learn more about our regulated building materials services and how we can help with your next project.
